Product Description:
ZGF-A intelligent non-destructive sorter adopts a large-screen LCD
display and a large-size digital display tube. The display
interface has: bar graph, cursor graph, waveform graph and digital
display. Users can choose different display interfaces according to
different sorting items, which makes the quality condition of the
measured workpiece clear at a glance on the display and makes the
operation of the instrument more intuitive and simpler for users.
1. Non-destructive testing, no special requirements on the surface
of the workpiece (to avoid the traditional detection methods need
to destroy the defects of the surface of the workpiece state).
2. The instrument is simple, convenient, with unqualified products
sound and light alarm function (the instrument is set up within the
man-machine dialogue function, only in the same specifications of
the workpiece to prepare two standard samples and after a simple
setup can be carried out after work).
3. Detection speed. (Detection of the workpiece only needs to be
positioned to contact the appropriate probe can be, the efficiency
of the traditional detection methods dozens of times, or even
hundreds of times).
4. To meet the needs of large-volume workpiece inspection, to
ensure product quality foolproof (can be a full 100 detection of
the workpiece, to avoid the conventional sampling caused by the
leakage of detection).
5. Instrument sensitivity can be adjusted in a wide range
(detection current and frequency continuously adjustable to adapt
to the needs of different workpieces and testing projects).
6. Rich graphical interface, the quality of the measured workpiece
intuitive display (using liquid crystal screen display and digital
tube dual display mode, the display interface has: bar graph, wave
pattern, cursor map and digital display of four. According to the
relevant graphics and cursor position can be observed intuitively
the quality of the workpiece under test, after the relevant
procedures can be set to measure the steel species, hardness value,
the height of the hardened layer, carbon content, etc.).
7. Instrument modelling beautiful, light weight, exchange.
Technical Parameters:
| Parameters | Specifications |
|---|
| Power Supply | 9V Battery |
| Resolution | 0.1 MS/cm |
| Environmental Conditions | 0 To 80% RH Non-condensing |
| Storage Temperature | -10 To 60°C |
| Temperature Compensation | Automatic (0 To 50°C) |
| Operating Temperature | 0 To 50°C |
| Measuring Range | 0.01 To 199.9 MS/cm |
| Calibration Points | 1 Or 2 Points |
| Temperature Coefficient | 2%/°C |
| Accuracy | ±2% Full Scale |
Applications:
1. Magnetically conductive materials (e.g. wire, plate, pipe,
strip, billet and various automotive parts, standard parts, bearing
parts, forgings, cast steel parts, etc.)
2. Distinction of steel grades and identification of steel grades
of the same specification size material. (Rapid sorting of
materials)
3. Hardness test and rapid differentiation of workpieces of the
same size. (Fast sorting of hardness)
4. Carbon content of materials can be measured for carbon
structural steel. (Carbon fixing)
5. Distinction and identification of defects in materials and
heat-treated workpieces. (Flaw detection)
6. Identification and sorting of mechanical properties of materials
and heat-treated workpieces.
Support and Services:
1. From the date of completion of the installation and
commissioning of the equipment, as the beginning of the quality
assurance period of the equipment. The supplier will warranty the
equipment for one year and implement lifelong maintenance service
for the equipment. In the equipment warranty period of the relevant
costs borne by the supplier, in the equipment warranty period of
the relevant costs of the supply side only charge material costs.
2. The equipment into normal operation after the supply side will
still be ready for the demand side to provide all the technical
advice
3. In the use of equipment in the process of the demand side can
not be resolved by the demand side of the technical problems, the
supply side in the receipt of the demand side's request, we can
take a Virtual Space Video, or get to the scene in time.
FAQ:
Q&A about Desisen FET-3X3 Electrical Conductivity Meter
- Q: What is the Brand Name for this Electrical Conductivity Meter?
A: The Brand Name for this Electrical Conductivity Meter is
Desisen. - Q: What is the Model Number for this Electrical Conductivity Meter?
A: The Model Number for this Electrical Conductivity Meter is
FET-3X3. - Q: Where is this Electrical Conductivity Meter made?
A: This Electrical Conductivity Meter is made in China. - Q: What is the Certification for this Electrical Conductivity
Meter?
A: This Electrical Conductivity Meter is ISO9001 certified. - Q: What is the Minimum Order Quantity for this Electrical
Conductivity Meter?
A: The Minimum Order Quantity for this Electrical Conductivity
Meter is 1.
