sorting machine It can store the upper and lower limit magnetic flux values of 10 kinds of bearings of different sizes

Functional features:
1. It is used for 100% non-destructive online automatic sorting of qualified and unqualified bearing hardness after heat treatment. Bearing with qualified hardness
The bearing with unqualified hardness will be automatically removed by the sorting barrier door.
2, can be qualified hardness of bearings and unqualified hardness of bearings (upper limit, lower limit) count respectively.
3, the main control instrument of the sorting machine has a column chart to dynamically display the bearing hardness state. The amplitude of the histogram of the high-low response was measured
Bearing hardness level, intuitive strong. After calibration, the hardness value of the bearing under test can be displayed.
4, in the sorting of the main control instrument with the upper and lower limit of the hardness range of the setting function key, convenient for the operator to use,
When the hardness of the bearing under test exceeds the upper limit or lower limit, the instrument will have the corresponding light and sound alarm, and
The qualified and unqualified signals are transmitted to the executive mechanism of the sorting machine for sorting.
5. The panel of the electrical control box of the sorting machine has a hardness state display light of the bearing under test, and the shaft is indicated when the green light is on
Bearing hardness qualified, the red light indicates that the bearing hardness is unqualified (over the upper limit or lower than the lower limit), when the bearing hardness
There is sound and light alarm when unqualified.
6. The sorting machine has a blocking alarm (storage device, feeding port), a frequency converter fault alarm, and the storage door is not received in time
Return alarm, automatic stop after fault alarm, automatic boot after fault removal function. The corresponding fault is displayed simultaneously
It's displayed on the screen.
7, the sorting machine master control instrument can store the upper limit and lower limit of 10 kinds of bearings of different specifications and sizes, and use No. 1 part,
No. 2, No. 3, No. 4, and No. 10 represent different sizes of tested bearings, which are convenient for users
Direct call.
Instrument parameters:
· Detection speed
Adjustable according to different specifications of bearings, not less than 600 pieces per hour.
· Detection accuracy:
Rockwell hardness: <±1HRC
· Equipment weight: 500Kg
· Compressed air pressure range: 0.15Mpa-0.8Mpa
· Bearing under test shall meet the following requirements:
The same material, the same size, the same surface state, the same heat treatment process system
· Overall dimensions of the equipment:
Mechanical transmission part: length × width × height =2200×920×1450mm (can be customized)
Main electric control cabinet: length × width × height =560×570×1530mm (can be customized)

Suzhou Desisen Electronics Co., Ltd. is engaged in the research, development and production of fully automatic flaw detection systems for various tubes, rods, wires, plates, metal parts, and automotive parts, including various series of eddy current flaw detectors, sorting instruments, ultrasonic flaw detectors, magnetic particle flaw detectors, and fully automatic penetrant flaw detection systems. 
We provide users with complete testing methods and processes to meet their requirements for rapid and complete testing of product quality and improving quality, The products are widely used in the electric power, aerospace, military, metallurgy, and mechanical manufacturing industries, especially in the non-destructive testing of tubes, rods, wires, plates, metal components, and automotive components.

In recent years, continuous achievements have been made, leading the introduction of multifunctional intelligent eddy current flaw detector, multi frequency eddy current flaw detector, dual frequency dual channel eddy current flaw detector, automatic tube and rod flaw detection system, automatic aircraft hub flaw detection system, etc. in China. The company, together with a number of universities and research institutes, has jointly developed high-speed flaw detectors, ultra-high-speed online eddy current flaw detectors, and a variety of fully automated flaw detection equipment, which has effectively promoted the development of China's testing industry. The various series of eddy current flaw detectors and fully automated flaw detection equipment produced are domestic brands, and their products are exported to Germany, the United States, the Middle East, Japan, South Korea, and other regions and are widely used in the metal manufacturing industry.

The company adheres to technological innovation and constantly develops high-performance eddy current flaw detectors, ultrasonic flaw detectors, fully automatic flaw detectors, and other products to meet user needs. We are willing to sincerely cooperate with users with a sincere spirit of dedication, and jointly occupy the international market in the process of globalization to create brilliance.