Product Description:
598 portable eddy current detector to electromagnetic base placed
on the probe on the material to be detected, the probe has an
excitation coil, there is a (or two) detection coil, detection has
the following advantages: the surface of the material to be
detected do not have to clean; probe and material surface does not
contact, the gap between the probe outer diameter and the material
inner diameter of the gap between the changes on the detection
results of a very small effect. The detection sensitivity of the
inner and outer surfaces of the material is the same; the detection
of uniform thinning, gradual thinning and partial wear thinning
have extremely high detection sensitivity; the detection speed of
the probe is uniform or not has no effect on the detection results;
the gas and liquid medium within the material has no effect on the
detection results; the detection equipment is small in size and
light in weight, which is convenient for flexible on-site
application.
Features:
The 598 Portable Eddy Current Flaw Detector is a new-generation
eddy current non-destructive testing equipment. It adopts the most
advanced DSP and FPGA digital electronic technologies, far-field
eddy current technology, and microprocessor technology, which can
effectively detect defects in metal components in real time. During
detection, it is not affected by probe lift-off, skin effect,
uneven electrical conductivity, or magnetic permeability.
The 598 Portable Eddy Current Flaw Detector is a complete far-field
eddy current testing system, featuring advanced performance of
multi-frequency eddy current testing instruments. In particular,
its high sampling rate, ultra-low noise, and high signal-to-noise
ratio make it a new-type eddy current testing equipment in the
Asia-Pacific region, characterized by high performance,
multi-functionality, and intelligence.
Technical Parameters:
| Name | Portable Eddy Current Flaw Detector FET-9HS |
|---|
| Frequency range | 1 Hz ~ 20 MHz (far field frequency 1Hz ~ 20KHz); |
| Gain | 0 ~ 90dB, step 0.5dB |
| Phase rotation | 0 ~ 359° step 1 ° |
| Gain ratio (Y/X) | 0.1 ~ 10 |
| Gain/Phase Measurement | manual/automatic |
| Display Mode | Dot/Line/Fade |
| High-pass Filter | Off, 0 ~2000Hz |
| Low Pass Filter | Off, 10~2000kHz |
| Display | Semi-reflective LCD with backlight, suitable for long term
observation in darkness or direct sunlight |
| scanning | erase, refresh and retain three scanning modes |
| filter | digital and analogue filter |
| Operating Temperature | -15~55℃ |
| Storage Temperature | -20~60℃ |
| Relative Humidity | not more than 85% |
| Operating Voltage | AC220±10V |
| With probe automatic zero system |
| fast mode digital / proposed electronic balance |
| automatic (manual) eddy current signal amplitude, phase
measurement, eddy current signal slow (adjustable) expansion of
playback |
| time base scanning and impedance plane map on the same screen |
| with the configuration of the analysis function |
| with a unique non-equal amplitude phase / amplitude alarm domain |
| the hardware alarm output port |
| can be stored in a variety of massive testing procedures and test
data |
| automatic Amplitude, phase / defect depth curve display |
| right-angle coordinate system and polar coordinate system
background selection |
| comes with lithium batteries (fully charged can be used for 6-8
hours) |
| the number of points of digital filtering: 1 ~ 100 |
| the hardware alarm output |
| the alarm output signal |
Support and Services:
Technical Support and Service for Portable Eddy Current Flaw
Detector
We provide technical support and service to ensure our customers
are satisfied with their Portable Eddy Current Flaw Detector. We
offer both on-site and online support for all of our products.
On-site Support
Our on-site support team is available to help with any
installation, troubleshooting, or maintenance related issues you
may have with your Portable Eddy Current Flaw Detector. Our
technicians can come to your location and help with any questions
or problems you may have.
Online Support
Our online support team is available 24/7 to help with any
questions or issues you may have with your Portable Eddy Current
Flaw Detector. We have a live chat feature on our website, as well
as an online ticket system for more in-depth issues. Our team is
always available to help.
FAQ:
Q1: What is the brand name of this product?
A1: The brand name of this product is Desisen.
Q2: What is the model number of this product?
A2: The model number of this product is 598.
Q3: Where is this product made?
A3: This product is made in China.
Q4: Does this product have any certification?
A4: Yes, this product has ISO9001 certification.
Q5: What's the minimum order quantity?
A5: The minimum order quantity is 1.
